Air Conditioning Installation in Anaheim, CA

So you’ve decided to beat the Anaheim heat once and for all by upgrading to a new high-efficiency air conditioning system from All Pro. Nicely done! You’re about to enjoy cooler temps, lower utility bills, and enhanced comfort for years to come. But before our certified techs arrive, there are a few simple steps you can take to prepare and help ensure a smooth installation:

Give It a Deep Clean

Over time, vents and returns can accumulate a good bit of dust, pet hair, you name it. Giving your HVAC system’s air paths a thorough vacuuming helps provide a fresh start. While you’re at it, be sure to clear any clutter or obstructions around indoor units and the area for that new outdoor condenser.

Check Those Air Filters

Speaking of fresh air, replace those HVAC air filters before your installation. Having clean new ones in place helps reduce particulate buildup right out of the gate. Your All Pro tech can also show you proper filter maintenance.

Note Any Concerns

If you’ve had issues with uneven cooling, ductwork leaks, or other heating and air flow problems, make note to pass that info to your installation crew. It may impact proper sizing or integration with existing components.

Secure Pets

Contractors love cute critters as much as anyone. But having pets underfoot during a multi-hour installation just risks accidents or escapes. Best to secure them safely in a separate room.

Plan for Access

Our All Pro team will need easy access to attics, crawlspaces, or anywhere ductwork may run. Making sure we can safely get to those areas avoids delays and complications. A little pre-planning goes a long way!

With just a few simple steps, you’ll be ready to kick back and watch the pros work their magic. And if any other questions come up, don’t hesitate to reach out! At All Pro, we’re here to guide you through every step of your new air conditioning installation.

If your current air conditioner still runs with that loud, roaring “on or off” setting, you’re seriously missing out on some major benefits. Those older AC units are like a bull in a china shop – blasting at full power until they overcool your space, then shutting off completely. No finesse whatsoever.

The newer variable speed models operate way smarter. Instead of just having an “on” switch, they can gently ramp up and down to deliver steady, consistent cooling. No more obnoxious startup sounds or feeling arctic blasts followed by hot stretches. Just an even, comfortable temperature all day.

But the real superpower of these modern ACs is their improved energy efficiency. See, those older units waste tons of electricity rapidly cycling between full blast and off over and over. With variable speed operation, your system can just lightly run at the perfect pace to maintain your setting. No more overcooling and wasting money!

Plus, running more frequently at lower speeds allows for much better dehumidification of the air. You’ll notice a nice, crisp feel without any of that sticky summer mugginess. Sayonara to swampy grossness!

And all that smooth, steady operation means way less wear-and-tear on components versus that aggressive start-stop cycling. Your variable speed AC will run quieter and likely last a bunch of extra years too.

If you’re looking to seriously upgrade your home’s cooling performance and save cash in the process, it’s time to ditch that old inefficient relic. Call the pros at All Pro and we’ll guide you towards a sweet variable speed system!

Sure, traditional central air conditioning systems require existing ductwork to circulate all that refreshing cooled air throughout your home. But what if your humble abode happens to be one of those older properties lacking those built-in air ducts? No sweat – the experts at All Pro have got you covered with a slick ductless mini-split solution!

See, ductless systems are comprised of an outdoor condensing unit connected to multiple indoor air handlers via small conduit lines. Those compact indoor units get mounted up high on your walls or ceiling to discreetly deliver focused cooling and heating right where you need it most.

Forget about costly renovations to retrofit ductwork or dealing with inefficient window units that are real eyesores. Ductless allows for customized, zone-by-zone temperature control while being crazy energy efficient. You can even set different temps for certain rooms based on usage and preferences.

And because ductless avoids the energy losses associated with leaky old ductwork, you could see your utility costs plummet by up to 30% compared to a traditional system. Those savings really start adding up over the summers!

Whether you’ve got an older home without ducts or you’re finishing an addition, basement or garage, ductless mini-splits offer the perfect flexible cooling and heating solution. The All Pro team can guide you through selecting the ideal ductless configuration and equipment for your space.

When it comes to installing a new air conditioner, making sure you get the proper size is absolutely crucial. Seriously, this isn’t something you want to guesstimate or just eyeball. An undersized unit will be constantly running on overdrive trying to keep up, leaving you swamped in sweat. But go too big and you’ll be paying out the nose for an overpowered system cycling on and off constantly.

The only way to get that “Goldilocks” perfectly sized AC is by having one of All Pro’s certified comfort advisors come out and thoroughly assess your home. We’ll take detailed measurements of your square footage, factor in insulation levels and window exposure, and calculate the cooling load based on your specific layout.

We’ll inspect your existing ductwork situation to ensure there’s enough airflow to properly circulate all that refreshing air. Duct issues like leaks or poor design can seriously hinder an AC’s performance no matter the size. We can also take care of any need duct or AC repairs.

Maybe your home has an addition or you recently finished a basement – we’ll make sure to account for those new spaces. Or perhaps you’re looking to get separate zoned cooling for areas that get extra usage. The All Pro team will guide you through all the considerations.

At the end of the day, you need an air conditioner that can keep every single room and corner of your home nice and chill without being overkill. Trust the pros to get that sizing exactly right from the start.

As an Anaheim homeowner, upgrading to a fancy new high-efficiency air conditioner is a smart long-term investment. But that upfront cost can really sting in the short-term. Thankfully, there are some sweet discounts and rebates out there to help soften that blow!

At the federal level, good ol’ Uncle Sam wants to incentivize you to make the eco-friendly choice. The recently revived tax credit lets you deduct 30% of the cost for installing eligible energy efficient heating and cooling systems right off your taxes. That’s like getting an automatic 30% discount just for being smart about your AC!

But wait, there’s more! California utilities like SoCal Edison and SoCal Gas also offer their own enticing rebates based on the efficiency ratings of your new equipment. Depending on which top-tier AC unit you select, these rebates could stack up to a thousand bucks or more in added savings. Now we’re talking!

Don’t forget the manufacturers too – they’ll occasionally run promotions and rebates if you buy specific qualifying models during certain periods. These deals come and go, but the team at All Pro always keeps an eye out to maximize your discounts.

Between the federal credits, utility incentives, manufacturer rebates and any other deals, it’s totally realistic to shave 30-40% right off the total cost of a premium high-efficiency AC installation. That’s like paying bottom-dollar prices for a top-of-the-line system!

Sure, all the paperwork and fine print make it seem complicated. But don’t sweat it – All Pro has you covered. We’ll make sure you receive every single discount, rebate and tax credit available in Anaheim. Just one more way we look out for the neighbors!

You’ve decided to treat your Anaheim home to a top-of-the-line new air conditioning system to keep things an oasis of chill all summer. Smart move! But before we get too far ahead of ourselves, there’s one crucial factor we need to look at – your electrical situation.

See, these larger modern AC units need some serious electrical service to run at peak performance. We’re talking dedicated circuits, properly gauged wiring, and enough capacity from your home’s electrical panel. Otherwise that cooling beast could end up overwhelming your outdated electrical and tripping breakers every time it kicks on. Not a fun time.

That’s why the team at All Pro always includes a thorough electrical evaluation as part of our installation process. We’ll inspect your service panel to verify it can actually handle the added electrical load from the new AC unit. If your electrical is looking a bit undersized or outdated, no sweat – we can go over options to upgrade components and bring things up to modern safety standards.

A little proactive electrical work upfront ensures that fancy new system will run smoothly without any issues from day one. You’d hate to drop all that cash on premium cooling only to have to constantly baby the thing to avoid overloads and short circuits. Not exactly an “oasis”!

With All Pro’s guidance, we’ll make sure your electrical setup is up to snuff before installing that new AC.

Watching a couple YouTube videos might make you think installing that new AC unit is totally doable as a DIY weekend warrior project. But before you start unboxing that shiny system and cracking open the tool chest, let’s pause for a reality check.

Proper air conditioner installation is way more involved than just plopping down the outdoor condenser and running some pipes and wires. You’ve got electrical circuits to properly establish, refrigerant lines to carefully braze without leaks, drainage to account for, ductwork integration, and a whole bunch of other little details that are crucial for safety and performance.

Make one tiny mistake on the electrical components and you could be facing a house fire. Cut corners on the refrigerant charging and you’ll have an inefficient system that can’t keep up. Those YouTube tutorials definitely don’t cover homeowner’s insurance claims!

Then there’s sizing – you need careful calculations to get a system that matches your home’s cooling needs. Too small and you’re swamped in sweat all summer. Too large and you’ll be paying out the nose for an oversized energy hog cycling on and off 24/7.

At the end of the day, you could follow all the online tips perfectly and still end up with leaks, electrical hazards, and a system that just can’t keep your castle comfortable when temperatures soar. Why risk the hassle and potential dangers of a DIY disaster?

One call to the pros at All Pro and we’ll size everything up, guide you towards the perfect system for your needs, and have your home an oasis of chill in no time.